6" Super-Lock Precision CNC Vise .0004" NC/CNC Clamping Clamp Device Vising

Description

Product description
Jaw Width: 6"
Jaw Opening: 6"
Jaw Depth: 1-1/2"
Overall Length: 15"
Bed Height: 2.8"
Overall Height: 4.8"
center distance between jaw's bolting screw: 3.8"
Clamping Force: 10,000 lbs
Flatness: 0.001"
Accuracy: both sides square to bottom: 0.0004"
Parallel to each other: 0.0008"
Product features
6" Super-Lock Precision CNC Vise .0004" NC/CNC Clamping Clamp Device Vising
Product description
Jaw Width: 6"
Jaw Opening: 6"
Jaw Depth: 1-1/2"
Overall Length: 15"
Bed Height: 2.8"
Overall Height: 4.8"
center distance between jaw's bolting screw: 3.8"
Clamping Force: 10,000 lbs
Flatness: 0.001"
Accuracy: both sides square to bottom: 0.0004"
Parallel to each other: 0.0008"
Product features
Lock down design up to 80% deflection
All sides flattened
Can be mounted on side or base
For small to intermediate NC/CNC milling, grinding, tapping operations in multiple vise set-ups with or without sub plates
Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt
Not recommended to place the jaw plate on the outside jaw to clamp on longer workpiece
Item Specifics
Brand
autoooparts
MPN
APO84752
UPC
Does not apply
Payment
1.We accept PayPal only.
2.E-checks via PayPal will be hold until it is cleared.
Shipping
We ship worldwide.
USPS First Class Mail or FedEx shipping, thank you.
Standard Order Processing time:
All items will ship within 3 days (Saturday afternoon, Sunday, and holidays except) after payment.
Returns
30 DAY MONEY BACK SATISFACTION GUARANTEE
Returns are permitted and must be initiated by the buyer within 30 days of the date of purchase.
In order to return an item, you must contact to request an Return Merchandise Authorization Number (RMA). No return package will be accepted without a valid RMA number. All products are covered by our warranty against defects. If an item proves to be defective, please contact to have the product repaired or replaced.
Contact Us
Please send all correspondence through the eBay messaging system.
Messages will be replied within 24 hours.
About us
Thank you for visiting our store. We hope you are satisfied with the item and our service.
Saving money for buyer and happy purchase are our goal.welcome to save my store for buy replacement parts. thank you.
Lighting & Lamps
Shop Category
Store Home
Suspension & Steering
Lighting & Lamps
◈  Fog Lights
◈  Xenon Headlight Ballast
◈  Headlight
◈  Fog Lamps cover
◈  Turn Lights
◈  Brake Lights
◈  Moto Lighting & Lamps
◈  Others
Carburetor
◈  Lawn Mowers Carburetor
◈  String Trimmers Carburetor
◈  Blower Carburetor
◈  Snow Blower Carburetor
◈  Snowthrower Carburetor
◈  Saw Carburetor
◈  Tractor Carburetor
◈  Motorcycle Carburetor
◈  ATV Carburetor
◈  Automobile Carburetor
◈  Others
◈  Golf Carburetor
◈  Gasket
◈  Intake Manifold Boot
◈  Rebuild kits
Boat
◈  Yacht Light
◈  Others
Auto Valve
◈  Pressure Relief Valve
◈  Air Idle Valve
◈  Transmission Solenoids
◈  Control Valve
◈  Valve Body
◈  EGR Valve
◈  Selector Valve
◈  Others
Motorcycle Valve
◈  Motorcycle Solenoid Valve
◈  Motorcycle fuel Switch Valve
◈  Motorcycle Gas Valve
Module
◈  Headlight Driver Module
◈  Fan Control Module
◈  Voltage Converter Module
◈  Others
Fule Injector
Brakes & Brake Parts
◈  Brake Master Cylinder
◈  Clutch & Clutch Parts
◈  Motorcycle Hand Brake Handle
◈  Motorcycle Brake Cable
◈  Motorcycle Brake Pads
◈  Others
Car Repair Kit
Auto Engine System
◈  Valve Cover & Gasket
◈  Oil Cooler
◈  Engine Timing Cover
◈  Thermostat
◈  Turbine Cover
◈  Machine Oil Can
◈  Engine Coolant Recovery Tank
◈  Glow Plug
◈  Filter Housing &Accessories
◈  Tilt Trim Motor
◈  Engine Rocker Arm Shaft Sleeve
◈  Valve Cover Breather
◈  Oil Scale
◈  Others
Auto Ignition System
◈  Spark Plug
◈  Car Ignition Coil
◈  Spark Plug Protective Cover
◈  Ignition Switch
◈  Car Ignition
◈  Car Ignition Module
◈  Others
Auto Hub
◈  Locking Hub
◈  Hub Bearing
◈  Wheel Spacers Adapters
◈  Others
Motorcycle Ignition System
◈  Motorcycle Ignition
◈  Motorcycle Ignition Coil
◈  Motorcycle Fuel Switch
◈  Motorcycle Hand Plate
◈  Motorcycle Ignition Switch
◈  Motorcycle Starter Fitting
◈  Motor Electromagnetic Starter
Motorcycle engine system
◈  Piston Cylinder Fittings
◈  Camshaft
◈  Others
Auto Actuator
◈  Air Conditioner Actuator
◈  Door Lock Actuator
◈  Hood Catch
◈  AC Blower Motor
◈  Clutch Actuator
◈  Fuel Door Opener Actuator
◈  Others
Auto Motor
◈  Transmission stepper motor
◈  Power Window Lift Motor
◈  Transfer Case Gear Motor
◈  Front Running Board Motor
◈  Blower Resistor
◈  Others
Auto Inlet & Outlet System
◈  Air Filter
◈  Intake Exhaust Valves
◈  Throttle Body
◈  Power Brake Booster
◈  Exhaust And Intake Pipes
◈  Turbocharger
◈  Others
Auto Circuit Wiring Harness
◈  Airbag Hairspring
◈  Positive Battery Cable
◈  Sensor Harness
◈  Body Wiring Harness
◈  Gear Shift Control Cable
◈  Battery Terminal
◈  Others
Transmission System
◈  Chain
◈  Shaft
◈  Gear
◈  Tensioner
◈  Belt
◈  Others
Auto Switch
◈  Door Power Window Switch
◈  Neutral Safety Switch
◈  Combination Lever Switch
◈  Parking Brake Switch
◈  Others
Motorcycle Control System
◈  Gearbox Shift Line
◈  Rectifier
◈  Relay
◈  Voltage Regulator
◈  Thumb Oiler
◈  Others
Auto Sensor
◈  TPMS Sensor
◈  Mass Air Flow Sensor
◈  Oxygen Sensor
◈  Knock (Detonation) Sensor
◈  Throttle Position Sensor (TPS)
◈  Vehicle Speed Sensor
◈  ABS Wheel Speed Sensor
◈  Fuel Pressure Sensor
◈  Crankshaft Position Sensor
◈  Oil Pressure Sensor
◈  Camshaft Position Sensor
◈  Ride Height Sensor
◈  MAP Sensor
◈  Exhaust Pressure Sensor
◈  Coolant Temperature Sensor
◈  Others
Motorcycle Pump
◈  Fuel Pump
◈  Brake Calipers
◈  Others
Auto Interior
◈  Plastic Rivets Fasteners
◈  Trunk Shield
◈  Sunroof Sunshade Corn
◈  Armrest Center Box Cover
◈  Cup Holder
◈  Inside Door Handle
◈  Inner Door Panel Handle
◈  Cigarette Lighter
◈  Storage Box
◈  Others
◈  Floor Mats
Exterior Trimming Parts
◈  Running Boards/Side Steps
◈  Bmuper Grille
◈  Fender Flares
◈  Door Handle
◈  Fuel tank cap
◈  Hinge
◈  Front Bumper
◈  Rear Bumper
◈  Motorcycle Decoration
◈  Others
◈  Windshield Wiper Blades
◈  Window Visors
◈   Auto body trim panel
◈  Front bumper trim
Auto Pump
◈  Fuel Pump
◈  Water Pump
◈  Air Pump
◈  Power Steering Pump
◈  Oil Pump
◈  Others
Business & Industrial
▷  Industrial Control Module
♢  Control Valves
♢  Other
▷  CNC
♢  Edge finder
♢  Drill Bits
♢  Spring Collet
♢  Boring Bar
♢  Mandrel
♢  Collet Chuck
♢  Pull Stud
♢  Quick Change Tool Post
♢  Drill Chuck
♢  Drill Chuck Arbors
♢  Live center
♢  Vise
♢  Milling Arbor
♢  Reamer
♢  Blocks
♢  Other
▷  Hand Tools
♢  Rivet Gun
♢  Wrenches
♢  Hydraulic Crimper
♢  Balance Level
♢  Drill Bits
♢  Outside Micrometer
♢  Casters
♢  Steel Tape Measure
♢  Other
▷  Metalworking Supplies
♢  Metal Cut Off Wheels
♢  Flap Discs
♢  Hose Clamp
♢  Welding Wire
♢  Piston Driver
♢  Other
▷  Generator Accessories
♢  Automatic Voltage Regulator
♢  Generator Carburetor
♢  Other
Home & Garden
◈  Yard, Garden & Outdoor Living
◈  Toy
◈  Others
Radiators & Parts
Other
Hot Item
Carb For Toro 6.5 6.75 7.0 7.25 HP Recycle Mower 190cc 22"
USD 9.28
New AVR SE350 Voltage Regulator Voltage Stabilizer Governor For Generator
USD 27.95
Weed Eater Cap For Worx Replacement Spool Line String Trimmer 12 Pack WA0010
USD 13.92
Carburetor For Kohler CV730 S CV740 S 25HP 27 HP Engine 24853102-S Tractor Carb
USD 29.96
Carburetor Fits for KOHLER CV12.5 CV13S CV13T CV14 CV14S CV15S Carb
USD 13.84
Excellent Delivery
New List Item
AVR MX341 Automatic Voltage Regulator For Generator Parts New
USD 35.88
Male & Female Flat Face Coupler Kit 6679837 6680018 For Bobcat 753
USD 102.98
Replacement Automatic Voltage Regulator AVC63-4 Input 190-240VAC 4A
USD 52.59
GAVR 8A AVR Generator Board Automatic Voltage Regulator Board Module Replacemen
USD 16.38
Carburetor For Toro Recycler Model 20370 149cc Lawn Mower Kohler 6.75 Motor Carb
USD 18.35
6" Super-Lock Precision CNC Vise .0004" NC/CNC Clamping Clamp Device Vising
Product description
Jaw Width: 6"
Jaw Opening: 6"
Jaw Depth: 1-1/2"
Overall Length: 15"
Bed Height: 2.8"
Overall Height: 4.8"
center distance between jaw's bolting screw: 3.8"
Clamping Force: 10,000 lbs
Flatness: 0.001"
Accuracy: both sides square to bottom: 0.0004"
Parallel to each other: 0.0008"
Product features
Lock down design up to 80% deflection
All sides flattened
Can be mounted on side or base
For small to intermediate NC/CNC milling, grinding, tapping operations in multiple vise set-ups with or without sub plates
Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt
Not recommended to place the jaw plate on the outside jaw to clamp on longer workpiece
Payment
Shipping
Returns
Contact Us
About us
1.We accept PayPal only.
2.E-checks via PayPal will be hold until it is cleared.
We ship worldwide.
USPS First Class Mail or FedEx shipping, thank you.
Standard Order Processing time:
All items will ship within 3 days (Saturday afternoon, Sunday, and holidays except) after payment.
30 DAY MONEY BACK SATISFACTION GUARANTEE
Returns are permitted and must be initiated by the buyer within 30 days of the date of purchase.
In order to return an item, you must contact to request an Return Merchandise Authorization Number (RMA). No return package will be accepted without a valid RMA number. All products are covered by our warranty against defects. If an item proves to be defective, please contact to have the product repaired or replaced.
Please send all correspondence through the eBay messaging system.
Messages will be replied within 24 hours.
Thank you for visiting our store. We hope you are satisfied with the item and our service.
Saving money for buyer and happy purchase are our goal.welcome to save my store for buy replacement parts. thank you.
All rights reserved.