Berkel X13E-PLUS 13" Manual Gravity Feed Meat Slicer - 1/2 hp

Description

Berkel X13E-PLUS 13" Manual Gravity Feed Meat Slicer - 1/2 hp
STANDARD FEATURES ■ 1-speed, 1⁄2 HP, permanently lubricated ball bearing knife motor with thermal protection. ■ Furnished in 120/60/1, 8 amps, AC, with 3 wire cord and plug. ■ One-piece NSF approved polymer base and product table for reduced seams, accessibility and easy cleaning. ■ Index knob conveniently located outside the drip zone in the upper left to provide quick and easy access. ■ Variable pitch barrel cam for ultra fine, precise slice adjustment to a thickness of 1 5⁄16" (34 mm). ■ 13" (330 mm) diameter, hollow ground, hardened and polished forged stainless steel knife ■ Large product table with extra capacity: • Rectangles up to 10 1⁄2" x 6 3⁄4" (265 mm x 170 mm) • Squares up to 7 1⁄2" (190 mm) • Rounds up to 8 1⁄2" (220 mm) diameter. ■ Articulating and full length rear mounted meat pusher with fence to secure and advance products evenly. ■ Ergonomic, multi-grip handle to advance product table. ■ Submersible, removable product table mounted sharpener for consistent sharpening and easy cleaning. ■ Borazon sharpening stones for fast, accurate sharpening and extended life. ■ No-volt release requires restarting the slicer after a power interruption. ■ Permanent ring guard protects entire non-slicing portion of the knife. ■ LED indicates power to the slicer. ■ Sealed start/stop switches conveniently located on the index knob housing out of the food zone. ■ An easy to use kick stand for easy cleaning under the slicer. ACCESSORIES Vegetable chute with pusher Product fence Slaw tray FEATURES Berkel model X13E-PLUS manual gravity feed slicer offers a number of special features. A sanitary one piece engineered polymer base and product table reduces seams and joints while providing an NSF approved surface for easy, effective cleaning. A removable and submersible table mounted sharpener with borazon stones for accurate sharpening. Precise thickness control is achieved using a variable pitch barrel cam for fine adjustment and wafer thin slices. The index knob and operating controls are mounted outside of the drip zone for quick and easy access. A permanent ring guard protects the entire non-slicing portion of the knife during slicing and cleaning. An easy to use kick stand supports the slicer for easy access to clean under the slicer. A fence is provided for extra holding of small products SPECIFICATIONS Motor: 1-speed, 1⁄2 HP totally enclosed and permanently lubricated ball bearings, thermally protected. Electrical: Furnished in 120/60/1, 8 amps, AC, ETL Listed, with a 6' long 3-wire cord and plug. Finish/Construction: Base, product table, pusher, support arm and upper housing are constructed of NSF approved, engineered polymers reducing the number of seams. Gauge plate and center plate are anodized aluminum. All controls are sealed and located out of the drip zone. Knife: 13" (330 mm) diameter, hollow ground, hardened and polished stainless steel. Knife Sharpener: Removable and submersible table mounted, two stone, dual action design to ensure correct pressure and contact angle are always applied, thus reducing knife wear and delivering a perfect edge. Borazon stones last longer, sharpen faster and clean easier. Thickness Control: Index knob controls a precision, variable pitch barrel cam with ultra-fine adjustment in the first revolution and opens to a thickness of 1 5⁄16" (34 mm) for accurate and consistent slicing. This control is located out of the drip zone on the upper left to provide quick and easy access for operation and cleaning. Product Table: Full gravity feed 45° angle with articulating rear mounted pusher that runs the entire length of the table to secure product for increased yield and consistency in every slice. A fence is included for additional product stability. Kick Stand: An easy to use kick stand supports the slicer for easy access to clean under the slicer. No-volt Release: Requires restarting the slicer in the event of a power interruption. Knife Ring Guard: Permanent tapered guard covers the non-slicing portion of the knife edge. Controls: Sealed push-button switches located on the index knob housing out of the drip zone. Warranty: Parts, labor and travel coverage for one year, exclusive of wear items.
Berkel X13E-PLUS 13" Manual Gravity Feed Meat Slicer - 1/2 hp
STANDARD FEATURES
■ 1-speed, 1⁄2 HP, permanently lubricated ball bearing knife motor with thermal protection.
■ Furnished in 120/60/1, 8 amps, AC, with 3 wire cord and plug.
■ One-piece NSF approved polymer base and product table for reduced seams, accessibility and easy cleaning.
■ Index knob conveniently located outside the drip zone in the upper left to provide quick and easy access.
■ Variable pitch barrel cam for ultra fine, precise slice adjustment to a thickness of 1 5⁄16" (34 mm).
■ 13" (330 mm) diameter, hollow ground, hardened and polished forged stainless steel knife
■ Large product table with extra capacity:
• Rectangles up to 10 1⁄2" x 6 3⁄4" (265 mm x 170 mm)
• Squares up to 7 1⁄2" (190 mm)
• Rounds up to 8 1⁄2" (220 mm) diameter.
■ Articulating and full length rear mounted meat pusher with fence to secure and advance products evenly.
■ Ergonomic, multi-grip handle to advance product table.
■ Submersible, removable product table mounted sharpener for consistent sharpening and easy cleaning.
■ Borazon sharpening stones for fast, accurate sharpening and extended life.
■ No-volt release requires restarting the slicer after a power interruption.
■ Permanent ring guard protects entire non-slicing portion of the knife.
■ LED indicates power to the slicer.
■ Sealed start/stop switches conveniently located on the index knob housing out of the food zone.
■ An easy to use kick stand for easy cleaning under the slicer.
ACCESSORIES
Vegetable chute with pusher
Product fence
Slaw tray
FEATURES
Berkel model X13E-PLUS manual gravity feed slicer offers a number of special features. A sanitary one piece engineered polymer base and product table reduces seams and joints while providing an NSF approved surface for easy, effective cleaning. A removable and submersible table mounted sharpener with borazon stones for accurate sharpening. Precise thickness control is achieved using a variable pitch barrel cam for fine adjustment and wafer thin slices. The index knob and operating controls are mounted outside of the drip zone for quick and easy access. A permanent ring guard protects the entire non-slicing portion of the knife during slicing and cleaning. An easy to use kick stand supports the slicer for easy access to clean under the slicer. A fence is provided for extra holding of small products
SPECIFICATIONS
Motor
: 1-speed, 1⁄2 HP totally enclosed and permanently lubricated ball bearings, thermally protected.
Electrical
: Furnished in 120/60/1, 8 amps, AC, ETL Listed, with a 6' long 3-wire cord and plug.
Finish/Construction
: Base, product table, pusher, support arm and upper housing are constructed of NSF approved, engineered polymers reducing the number of seams. Gauge plate and center plate are anodized aluminum. All controls are sealed and located out of the drip zone.
Knife:
13" (330 mm) diameter, hollow ground, hardened and polished stainless steel.
Knife Sharpener
: Removable and submersible table mounted, two stone, dual action design to ensure correct pressure and contact angle are always applied, thus reducing knife wear and delivering a perfect edge. Borazon stones last longer, sharpen faster and clean easier.
Thickness Control
: Index knob controls a precision, variable pitch barrel cam with ultra-fine adjustment in the first revolution and opens to a thickness of 1 5⁄16" (34 mm) for accurate and consistent slicing. This control is located out of the drip zone on the upper left to provide quick and easy access for operation and cleaning.
Product Table
: Full gravity feed 45° angle with articulating rear mounted pusher that runs the entire length of the table to secure product for increased yield and consistency in every slice. A fence is included for additional product stability.
Kick Stand:
An easy to use kick stand supports the slicer for easy access to clean under the slicer.
No-volt Release
: Requires restarting the slicer in the event of a power interruption.
Knife Ring Guard:
Permanent tapered guard covers the non-slicing portion of the knife edge.
Controls
: Sealed push-button switches located on the index knob housing out of the drip zone.
Warranty
: Parts, labor and travel coverage for one year, exclusive of wear items.
×
×
×
×
×
Buy now and save!
Tell a friend
Watch now
Postage info
Click the Postage tab above the listing description for more info
FREE Postage
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
Garland G60-6R24RR NAT 6 Burner 60" Range, 24" Raised Griddle, 2 Standard Ovens
Garland G60-4G36RR LP Gas 4 Burner 60" Range with 36" Griddle, 2 Standard Ovens
Peerless C131B Gas Countertop Bake Oven - 30,000 BTU
Amana RCS10TS Commercial Microwave Oven Medium Volume - 120V, 1000W
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Restauranium
Postage
Shipping is FREE for this item
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
eBay integration
by